GripTek Barrier Backing for IPA Acrylic & Bonéthane Splashbacks by ISPS Innovations
WHAT IS GRIPTEK Barrier Backing ™ FOR ISPS SPLASHBACKS?
GRIPTEK Barrier Backing ™ is applied to the backs of IPA Acrylic splashbacks and Bonéthane high heat polymer wall panels, ready to use as a splashback in your home.
GRIPTEK Barrier Backing ™ eliminates the unsightly wear of silicone and shadow marks peering through the face of ISPS painted or printed acrylic polymer splashback sheets.
GRIPTEK Barrier Backing ™prevents delaminating of paint coating, from expansion and contraction once mounted to the wall which can take a few years to eventuate, by then suppliers can shift blame to maintenance of the product leaving you short in warranty.
GRIPTEK Barrier Backing ™ assists with greater depth of colour and consistency.
GRIPTEK Barrier Backing ™saves time and costs in wall preparation when installing sheets.
Bonéthane and IPA Acrylic Splashbacks can go straight over water proofing and tiles with only limited neutral cure colour coating being applied to where sheets overlap or are butt joined. Apply an 18 mm to 20mm strip of colour (the same colour) as your sheets to prevent water proof colour peering through reflective breaks caused by prism gaps that bounce through corner light.
IPA Acrylic has a 30 year UV warranty allowing the material to weather outdoors as well.
If applying IPA Acrylic to wet areas, it is mandatory to water proof your walls, allow to cure - to protect your wall and floor lining. IPA acrylic is 100% water proof but not a substitute for waterproofing your wall.
Sheets can go straight over water proofing and tiles with only limited neutral cure colour coating to corners of the wall or where sheets over lap or are butt joined, this prevents colour peering through reflective prism gaps that bounce corner light.
If you require further information, please do not hesitate to call.
Some of our products include.
ISPS supply painted PLEXIGLAS on request as well.
CulourTek Benchtops available in mottle stone look, marble look, timber look in any colour combination.
ISPS doors and panels in 2pac finish
ISPS provide silicone, blades and any tools you may require to assist you with your DIY installation.