Printed Splashbacks that fail in Kitchens, Bathrooms & Commercial Projects.

www.ispsinnovations.com.au

ISPS lead in innovation for painted and printed polymer acrylic splashbacks

Be aware of printed splashbacks & coloured splashbacks that fail.

Digitally printing onto splashbacks & wall panels, using a printed machine is achieved simply by using an ink that instantly cures on contact without overloading colour on a flat surface. 

The ink does not key into the sheet, it sits on the outer layer meaning the adhering of the image is intact by using its own colour connection over the surface.

NOTE: The digital image backs are not prepared for adhesion to the wall without protection and proper preparation, without it, the sheets may eventually fail.

THE IMAGE / COLOUR ON THE REAR OF SHEETS NEED PROTECTION - GRIPTEK barrier backing ™ is the ANSWER . Our formula keys into the rear of the sheet, protecting the digital image & painted splashback as demonstrated in the video below.

ISPS Innovations marine grade protective barrier coating - GRIPTEK barrier backing ™ is now available on ISPS printed splashbacks as well as well as our painted splashbacks.

ISPS splashbacks are waterproofed & ready for installation over gyp-rock walls,  tiles, waterproofed walls & plastered walls. Note where plastered walls rest on to concrete or brick walls, ensure no moisture is seeping from the base its adhered to through to the plaster.

ISPS Innovations splashbacks come with GRIPTEK barrier backing™ minimising coating the entire wall a neutral colour with the exception of sheets that overlap in corners, or where sheets are butt joining together. In these sections apply a 20 mm thin strip of non acidic coloured paint similar to your sheet either side of corner or the resting butt join position, allow to cure, applying the colour prevents any colour water proofing, shadows or tiles peering through the gaps.

ISPS Innovations lead in colour technology and durable colour adhesion. WE ARE  ISPS -  Innovative  Splashback  Polymer  Systems, not the copy cats.

ISPSInnovations provide robust warranties & proof that the backs of our splashbacks are protected by more than a vinyl wrap or double layer of printed ink that is UV cured.

Printing machines share similar technology, some inks better than others however they all adhere using similar digital printing methods & require protection. 

Example we advise not to place printed and coloured splashbacks to brick walls, concrete walls, or walls where moisture is trapped. 

• These walls require a level of preparation before you apply your splashbacks to the wall be it glass or polymer.
• For more information about  wall preparation call our office and we will be happy to explain before you purchase your glass or  polymer acrylic splashback. 

Some companies sell acrylic digital printed splashbacks and wall panels for the use in bathrooms and kitchens in domestic and commercial projects without any protection against the ink on the back of the sheet where the silicone is to be applied to, theese acrylic splashback suppliers refer to their substrate as waterproofed, not the case, whilst the polymer is water resistant the coating be it print or paint, will break down without adequate protection to the rear of the sheet..

Some acrylic splashback supplier even advise to apply metal plates over the face of acrylic printed splashbacks & acrylic painted splashbacks to get away with placing Acrylic splashbacks behind gas burners & we all know metal is a conductor of heat, even if its a loop hole that meets a standard, it's a disgrace selling someone an acrylic splashback behind a gas burner without super protection for the sheet and a person or families safety.

That is why ISPS Innovations supply coloured & printed heat treated toughened glass for behind gas cooktops.

Warranties, backed up by solutions and quality substrates materials like Bonéthane, IPA Acrylic digital printed splashbacks & painted splashbacks are unmatched by acrylic splashback competitors at every level even when they state they leave competition for dead.

Trade secrets and history making formulas is what give ISPS the edge over copy cat alternative polymer acrylic splashback suppliers.

About printed splashbacks not protected at the rear of the sheet: Have you purchased a polymer printed acrylic splashback with an unprotected back? odds are what you see in these images may happen to you, silicone bleeding through the digital image. We know this can happen to coloured and printed splashbacks when mounted to brick walls. Clearly these sheets were not mounted to brick or concrete walls.

These disappointingly processed printed splashbacks are from some of the commercial businesses outlaying money for a defective product. The printed splashbacks are nowhere near a direct heat source but dealing with the general thermal expansion and contraction. The silicone used was neutral cure but has succeeded to consume its way through the digital printed & painted splashbacks.

The printed splashback can only temporarily be protected & the last thing you want is a vinyl wrap, or unprotected print to the rear of your printed splashback failing.

ISPS have formulated a colour application that covers the rear of your digital printed image & spray-painted splashbacks allowing you to cut onsite and install your polymer acrylic splashbacks with ease.

You do not need to coat the wall a neutral colour with the exception of the corners & butt joining.

ISPS sheets are not a substitute for water proofing walls even if the sheets our sheets are 100% water proofed, you still need to protect your wall and follow the Australian Standards.

By water proofing your walls and floor you are protecting your home from water damage, following water proofing requirements is key to protecting your home.

At ISPS we have three painted & printed splashbacks to choose from, Bonéthane, Toughened heat-treated Glass &  IPA Acrylic. 

Check out our other range of Australian made building products CulourTek Benchtops & Doors

For more information on our innovative polymer splashback & glass range call ISPS Innovations, we got you covered.

ISPS Innovations Splashbacks. The Right Choice.

ISPS Innovations supply painted splashbacks and printed splashback to Sydney, Melbourne, Adelaide, Brisbane, Hobart, Perth, Darwin, Cairns, ACT. ISPS Innovations splashbacks are Australian made and nationally delivered to you Australia wide.

www.ispsinnovations.com.au

Opulence IPA Acrylic Coloured & Printed Splashbacks by ISPS Innovations

ISPS Innovations IPA Acrylic panels & splashbacks are custom coloured & digitally printed splashbacks. Our painted colour & printed  designs are applied to the rear of our Bonéthane & IPA Acrylic Splashbacks & sealed by GRIPTEK barrier backing. These splashbacks are ideal for owners or proprietors looking for that personalised appearance in their kitchen, laundry, bathroom, business, school, or medical facility. Unlike metal splashbacks when scratched are non repairable. ISPS Innovations polymer splashbacks can be repaired and restored to its original lustre.

Provide any a high resolution, image, pattern, graphic, fancy writing, specifiers can expect a sharp, neat, and precise digitally imprinted polymer splashback provided and structured to your requirements by ISPS Innovations gifted design crew. If you require printed glass splashbacks, we address that too, & others will opt for a painted coloured splashbacks. 

Your coloured or printed splashback under your direction and our support will receive a splashback complete for installation requiring some silicone for installation unless you want that total DIY experience and cut it up yourself!

Opulence Printed Acrylic Splashbacks by ISPS Innovations are the look & ISPS Innovations printed IPA acrylic splashbacks & Bonéthane higher heat polymer wall panels are brighter & 30-levels greater than glass and 100 levels greater than inferior substandard screen-printed unprotected finishes.

Non-yellowing, waterproofed with GRIPTEK barrier backing not a vinyl wrap or screen printing finished back, resilient to discoloration, flaking, IPA acrylic splashbacks offer up to 85 degrees heat resistance & 110 degrees with Bonéthane suited for induction, ceramic cooktops & free-standing gas hobs with metal insulator to the rear of the cooktop, fitting for domestic & business use.

IPA Acrylic & Bonéthane splashbacks are leisurelier to install than copycat alternatives, creating the DIY system, with your order direct from the manufacturer Australia-wide.

Detail your personal magnificence with our printed and coloured IPA acrylic splashbacks & Bonéthane high heat polymer splashback by going to ISPS Innovations on line www.ispsinnovations.com.au

GRIPTEK barrier backing is not available on PLEXIGLAS, PERSPEX, Vistelle, Lustre Light, Bellessi, Akril,or Reflection Splashbacks

Our polymer coloured printed acrylic splashbacks & glass splashbacks are supplied to Sydney, NSW Coffs harbour

Our polymer coloured printed acrylic splashbacks & glass splashbacks are supplied to Melbourne, Geelong Victoria Victoria

Our polymer coloured printed acrylic splashbacks & glass splashbacks are supplied to Adelaide, South Australia

Our polymer coloured printed acrylic splashbacks & glass splashbacks are supplied to Perth, Western Australia

Our polymer coloured printed acrylic splashbacks & glass splashbacks are supplied to Brisbane, Queensland, Sunshine Coast, Cairns

Our polymer coloured printed acrylic splashbacks & glass splashbacks are supplied to Northern Territory, Darwin

Our polymer coloured printed acrylic splashbacks & glass splashbacks are supplied to Tasmania Hobart,

Our polymer coloured printed acrylic splashbacks & glass splashbacks are supplied to Act, Canberra

Australia Wide

Coloured & Printed Splashbacks with GRIPTEK barrier backing – Heat & Marine grade for Commercial & Domestic application.

New Range of Art Painted Splashbacks converted into printed splashbacks by ISPS Innovations

New range of Painted Art converted to printed splashbacks by ISPS Innovations

ISPS Innovations take pride in our decorative custom painted & printed polymer splashbacks & wall panels.

ISPS have formulated a marine grade neutral cure colour application, GripTek barrier backing™, that covers the rear of our digital printed splashbacks & spray-painted splashbacks preventing damage to the backs of our polymer sheets Griptek barrier backing™

GRIPTEK barrier backing™ protects the backs of painted & printed splashbacks.

Commercial & Domestic Printed Splashbacks with GripTek barrier backing ™

IPA Acrylic printed splashbacks & Bonéthane, are suitable for showers, kitchens, laundries, wet areas, used for commercial projects, & domestic DIY home renovations. If other printed splashback suppliers advise their printed splashbacks are waterproofed asked them how the rear of the splashback is protected and have them demonstrate the protective back durability.

ISPS Printed splashbacks & coloured splashbacks are sealed, waterproofed preventing damage to the backs of our polymer sheets with ISPS one of a kind marine grade backing formulae Griptek barrier backing™

Our Printed Acrylic splashbacks, are printed to the rear of our polymer sheets & glass panels. Unlike face printed splashbacks that will scratch off, if knocked.

Our printed splashbacks & painted splashbacks are proudly Australian made. 

Being rear printed splashbacks provides a realistic depth & naturalness. Printed acrylic splashbacks are cheaper than printed glass splashbacks. Our Innovative Designer Splashbacks are not ordinary but extraordinary, turning your high-resolution image into a luxury printed splashback masterpiece for everyone to adorn. What is more, our printed & painted polymer splashbacks are waterproofed with a protective marine grade barrier backing applied to the rear of the sheet called GRIPTEK barrier backing, quality tested since 1998 & now applied to our painted & printed splashbacks.

ISPS Printed Splashbacks have the highest resolution using the state-of-the-art printing technology for our polymer acrylic printed splashbacks, Bonethane Printed Splashbacks & IPA Acrylic Printed Splashbacks coupled with our GRIPTEK barrier backing formula designed to protect the painted & printed finish applied to the backs of our sheets. Our glass printed splashbacks don’t require GRIPTEK as these are protected when heat treated after printing.

Bonethane Splashbacks a high heat polymer available in any colour & print

ISPS custom coloured & printed splashbacks in our new kitchen build

ISPS Innovations can print or paint to other substrates like PLEXIGLAS or Perspex on request, GRIPTEK barrier backing™ is not available on these substrates. GRIPTEK barrier backing™ is apart of IPA Acrylic & Bonéthane high heat polymer sheets, these sheets have been successfully servicing the domestic & commercial industry since 2000 & the right choice for your polymer splashbacks.

Printed & Painted splashback warranties general screen-printing & spray-painting processes allow a 1–2-year warranty, prone to silicone bleeds in the face of the sheet. Other printed acrylic splashback providers, run with warranties of well-known PMMA Acrylic like PLEXIGLAS or Perspex to bring merit to their product, but the applicated product will never be covered under the “brands” warranty once altered. ISPS IPA Acrylic & Bonéthane, come with a 7-year structural warranty extended to a 10-year warranty when installed by our simple installation process  IPA Acrylic & Bonéthane is the trusted polymer splashback brand for Architects, Designers and DIY Renovators.

See the damage caused to Printed Splashbacks for a commercial fit out in a chain of fuel stations.

Silicone Bleeding from non protected printed backs

Bonéthane Splashbacks - suitable for induction, ceramic & free-standing gas cooktops

Bonéthane is designed to go behind induction, ceramic cooktops & free-standing gas hobs where metal insulator is present to the rear of the cooktop with a 60 mm clearance for airflow. Bonéthane can also be placed behind benched gas hobs where you have a 200 mm clearance from the extension of the flame, the only way to achieve this is to have a deeper benchtop greater than 600 mm depth, ISPS Innovations also supply custom coloured CulourTek Benchtops™ as a part of our range.

If you require further information, please do not hesitate to call 08 8381 8880. ISPS Innovations nationally supply our total range Australia wide & proudly Australian made.

ISPS Innovations the right choice for your painted & printed splashbacks

ISPS Printed Splashbacks & Painted Splashbacks Innovative Splashback Polymer Systems

Custom Printed & Painted Splashbacks New Timber EFX Splashbacks - custom colour combination

What is GRIPTEK barrier backing on polymer IPA Acrylic Bathroom Wall Panels and  Bonethane Splashbacks

GRIPTEK Backing eliminates the unsightly wear of silicone marks or the delaminating of colour coatings once mounted to the wall.
You do not need to PREP wall a neutral colour or sand the back of ISPS Acrylic polymer sheets before you place your IPA Acrylic up on the wall.
GripTek Barrier Backing creates greater colour depth and  colour consistency for colour and printed splashbacks.
IPA painted Acrylic with GRIPTEK barrier backing can also be removed off the wall without damaging the integrity of the colour on the backs of our IPA acrylic sheet.
Acrylic Splashbacks in IPA Acrylic and Bonethane with GRIPTEK barrier backing eliminates unsightly neutral cure silicone bleeds which happens from expansion and contraction.
Acrylic Splashbacks with GRIPTEK barrier backing saves time and costs in wall preparation when installing IPA Acrylic sheeting over water proofing.
GRIPTEK is not available on  Zenolite, Vistelle, Bellessi or PLEXGLAS, GRIPTEK on the backs of ISPS brands prevents sanding the backs of the sheets and neutral cure  clear silicone bleeding.
GRIPTEK is not a substitute for water proofing in shower areas.
IPA Acrylic splashbacks & Bonethane Splashbacks are 100% water proofed, but  you still need to protect your walls from internal water damage with a good water proof coating.